 MIG Welding Wire is commonly use in high deposition rate welding process. The wire generates a stable arc and also have very low spatter during welding. It can weld using either CO2 Gas or Argon shielding Gas.
Swan CO2 Welding Wire can also weld in a consistent and
continuous manner (Long Weld) without any interruptions. Large gaps can be filled or bridged easily at all positions and is also easy to handle and does not require skill welder for easy operation.
You only require to have minimal post weld cleaning and there is no
stub loss as compared to covered electrodes.
All in all, the whole process is easy to operate, in addition, a better
and clean environment.
Below shows the area which CO2 Wedling Wire are widely used:
| |
a) |
Automobile Industry |
| |
b) |
Motor Cycle & Bicycle |
| |
c) |
Ship Construction |
| |
d) |
Containers |
| |
e) |
Steel Furniture Industry |
| |
f) |
Steel Fabrication & Engineering |
| |
g) |
Gas Tanks & Fire Extinguishers |
| |
h) |
Other welding process |
Kindly please CONTACT us for the BEST PRICE.
Certificate: Lloyd's Register - Section 5 - Solid Wire / Gas Shield
Typical Wire Analysis (Wt %)
C (Carbon) |
Mn
(Manganese) |
Si
(Silicon) |
S
(Sulphur) |
P
(Phosphorus) |
0.06 - 0.15 |
1.40 - 1.85 |
0.8 - 1.15 |
0.035 (Max) |
0.025 (Max) |
Sizes Available and Recommended Currents (DC < + >)
| Wire Diameter |
0.80mm |
0.90mm |
1.0mm |
1.2mm |
1.6mm |
Welding Current Rang(amps) |
Download & Horizontal |
50~150 |
70~180 |
85~240 |
110~315 |
190~390 |
Vertical Up |
50~120 |
60~120 |
75~140 |
90~160 |
160~350 |
Voltage Range (Volts) |
15-24 |
15-24 |
17-26 |
19-32 |
19-34 |
Kindly please CONTACT us for the BEST PRICE.
| 
